Marketing materials for events are the printed and digital pieces that explain your business to a stranger in a few seconds and let you follow up after they walk away. For a local service business in the Twin Cities East Metro or the St. Croix Valley, that usually means a booth at a home and garden show, a county fair, a chamber expo or a community festival, where many people walk past and only some stop.

This post covers the core kit for a booth, how each piece is followed up, print design basics, how to capture and follow up leads quickly, and how to measure which events paid off. It is written for plumbers, contractors, landscapers, cleaners and similar businesses working an event table, and the advice is general rather than a rulebook for any particular show.

The core kit: marketing materials for events

A booth works when a visitor can understand what you do from the aisle, take something away and give you a way to reach them. Five pieces cover that.

  • A banner or backdrop. It is read from a distance, so it carries your name, what you do, and where you work. It is not the place for a list of every service.
  • A handout. One page or one card with a single offer, a photo of real work and a way to contact you. In our experience, a stack of brochures that nobody reads is worse than a simple sheet people keep.
  • Business cards. They still matter at chamber expos and trade events, where people expect to exchange them. Put the cards where people can pick them up without asking.
  • A QR code to a landing page. It should open a page built for the event, such as an estimate request or a seasonal offer, not your home page.
  • A lead capture form. A tablet or phone form that sends each entry directly to your CRM, so there is no pile of paper sign-up sheets to type in later.

In our experience, the last two matter most for results. Printed pieces get attention, but the QR code and the form are what turn a conversation into a lead you can contact and measure.

What each piece does and how it gets followed up

Every piece should have a job and a follow-up path. If you cannot say what happens to a handout after someone takes it, it is decoration. The table sets that out.

Scroll to see all columns

MaterialIts job at the eventWhere it pointsHow it is followed up
Banner or backdropTell people who you are and what you do from a distanceThe booth itself and the QR code nearbyIt does not capture anything, so staff start the conversation and use the form
Handout or one-page offerGive a reason to remember you and a single next stepA QR code and a phone numberTrack the code's scans, and ask visitors who took it to join the lead form
Business cardPut your contact details in a pocketYour phone, website or a page for the eventWrite a note on the back or enter the contact in your CRM that day
QR code to a landing pageLet visitors act on their own phonesA page that matches the offer and the eventForm submissions land in your CRM with the event as the source
Lead capture formRecord who you spoke with, what they need and consent to be contactedYour CRM and its follow-up automationSame-day text or email, then a call or estimate booking

Match your materials to the event

The same kit does not fit every venue. The kinds of events local businesses work in this area bring different crowds, and your handout should reflect that.

  • Home and garden shows. Visitors are planning projects. Lead with a specific offer, such as a free estimate for a remodel or a spring cleanup, and point the code to project examples.
  • County fairs. Foot traffic is high and most people are not shopping for your service that day. Keep the booth simple, make scanning a code quick, and focus on being remembered.
  • Chamber expos. Many visitors are other business owners. Cards and a clear explanation of who you serve and how to refer you matter more than a consumer offer.
  • Community festivals. They reward local roots. Show real jobs near the festival, such as projects in Stillwater, Hudson or the neighborhoods nearby, and make it easy to follow you online.

If you serve both Minnesota and western Wisconsin, consider a landing page for each side of the river, so a visitor from Hudson sees projects and details relevant to them. Before you commit to an event, ask the organizer who attends and what exhibitors usually collect from the crowd. We have not listed particular events here because dates, fees and formats change, so check the organizer's own page for current details.

Design basics for printed event materials

Event materials are read quickly, in poor light, by people who are walking. Keep these rules in mind and you will avoid most mistakes.

  • One hierarchy. Decide what a person should read first, second and third: your name and trade, the offer, then the contact step. If everything is the same size, nothing is read.
  • One offer. A free estimate, a seasonal check or a drawing entry. Two or three offers split attention and weaken all of them.
  • Readable from a distance. Set the banner up and walk to the far side of the aisle. If you cannot read your trade and your name from there, the type is too small.
  • Real photos. Use your own finished jobs. Your own finished jobs show visitors the work of the person across the table, which stock images cannot.
  • A clear next step. Say exactly what to do, such as "Scan to request your estimate," and put the code where a person can scan it without leaning over a table.
  • Brand consistency. The banner, handout and cards should look like one business, using the same logo, colors and wording as your truck and website.

Ask your printer for the exact size and file requirements for each item before you design it, since those vary by product and vendor. Printed booth materials are advertising. Minnesota law says the license number of a licensee must appear in any advertising by that licensee, and the Department of Labor and Industry's residential contractor FAQ lists business cards and all other advertising, including websites. This is general information, not legal advice; confirm with the Department of Labor and Industry or your attorney. Our post with print marketing materials examples shows what common pieces look like, and our brand and copy service covers the design and wording of materials like these.

Make the QR code trustworthy

People have good reason to be careful with QR codes. The Federal Trade Commission's consumer alert on QR codes and scams says scammers hide harmful links in them and advises people to inspect the URL before opening it. It also describes scammers covering real codes with their own. Print your web address in words beside the code so visitors can check where it goes, and never stick a code over another surface. Test the printed code on both iPhone and Android phones before the event.

Capture leads and follow up after the event

Most of the value of an event is lost in the week after it. People forget the booth quickly, and a shoebox of cards does not produce work. Plan the follow-up before you go.

  1. Capture in one place. Use the form on a tablet or have visitors scan the code. Everything goes to the CRM, with fields for the service they want, their town, and the event name.
  2. Respond the same day. A short message that says who you are, where you met and what happens next keeps the conversation warm. Our post on speed to lead explains why response time matters and how to automate the first reply.
  3. Move to a real next step. Within a few days, call the visitors who asked for an estimate and offer booking times. Send a lighter message to those who only wanted information.
  4. Sort the rest. Tag casual contacts for later seasonal follow-up instead of dropping them.

Email and text follow-up come with legal rules. For email, the FTC's CAN-SPAM compliance guide says you must honor an opt-out request within 10 business days and include a valid physical postal address in commercial messages. Texting has its own consent rules, so ask on the form for permission to contact people by text and keep a record of it. This is general information, not legal advice. Confirm your process with your attorney.

Measure event results with UTM-tagged QR codes

You can tell which events paid off if each one has its own tracking. A UTM-tagged link adds labels to your landing page address so Google Analytics knows where a visit came from. Google's help page on collecting campaign data with custom URLs says to always use utm_source, utm_medium and utm_campaign, and notes that values are case sensitive, so Meta and meta are treated as different values.

An illustrative example for a made-up deck company, Ridgeline Deck Co., at a spring home show: the QR code points to its estimate page with utm_source set to homeshow, utm_medium set to qr and utm_campaign set to spring-booth. At a county fair, only the campaign value changes. Use lowercase for all values, keep a short list of the labels you use, and generate a separate code for each event.

Scans are only part of the picture, because many people will pick up a card and call later. Add three more measures:

  • Record the event as the lead source in your CRM for every entry from the form.
  • Ask callers in the following weeks how they heard about you, and log the answer.
  • Count the estimates and jobs that came from each event's leads.

Then compare each event's total cost, including the booth fee, printing, staff time and any giveaways, with the jobs it produced. Some events may bring name recognition rather than immediate work, so decide in advance what you expect from each.

If you are hosting the event

The rest of this post is written for exhibitors. If your business is the one organizing the event, the same pieces apply with a different job. Before the event, a flyer and a social post should point to one registration or landing page, so every announcement sends people to the same place. At the event, directional signs help people find the entrance and the check-in table, and a sign-in sheet or a QR sign-up records who came. After the event, send a thank-you email to the people who opted in, with a recap and the date of the next one. Tag each link the same way as above so you can see which announcement brought people in.

If you would like help building the landing page, form and follow-up for your next booth, you can contact McKinney Creative Ventures.